Alphacool releases Eiswolf 2 AIO cooling solution for GeForce RTX 3090 Founders Edition

Published: 17th Feb 2022, 12:40 GMT   Comments

« press release »


Alphacool today presents the Eiswolf 2 All-in-One solution for Geforce RTX 3090 Founders Edition graphics cards.

The Eiswolf 2 uses the Alphacool 360mm NexXxoS ST30 full copper radiator. For the fans, we use the 120mm Alphacool Aurora Rise. The AIO is completed by the Eisblock Aurora water cooler. This not only cools the GPU chip, but actively cools all relevant components such as the memory and VRAM. It also has brilliant aRGB lighting.

All components used (radiator, fan, cooler, DC-LT 2 pump) including fittings and tubing are part of the Alphacool DIY range and are therefore available separately. The combination of all components results in a solution that is as easy to install as an AIO, but offers the performance of a pre-assembled and pre-filled custom loop.

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.

Fullcover Waterblock?
The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.

Pump
The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.

Fittings and Tubing
As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.

Expandability
By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.

Lighting and fans
The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo
for AMD cards. The name “Eiswolf” on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan
convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.

NexXxoS Radiator
As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool’s worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a preassembled and prefilled custom loop.

Alphacool Eiswolf 2 AIO 360mm RTX 3090 Founders Edition with Backplate

Cooler and Pump

  • Material cooler bottom: Nickel plated copper
  • Material cooler: top acrylic
  • Pump type: DC-LT 2
  • Pump speed: 2600 rpm (+/- 10%)

Radiator

  • L x W x H: 395 x 124 x 30mm (+/- 3%)
  • Material cooling fins, prechambers & channels copper: Material threads brass
  • Material outer housing: stainless steel
  • For fan size: 120 mm

Fans

  • Speed: 0 – 2500 RPM
  • Static pressure: 3,17 mm H2O
  • Air flow rate: 119,8 m³/h

Compatibility

  • NVIDIA GeForce RTX 3090 Founders Edition

« end of the press release »




Comment Policy
  • Comments must be written in English.
  • Comments deemed to be spam or solely promotional in nature will be deleted. Including a link to relevant content is permitted, but comments should be relevant to the post topic. Discussions about politics are not allowed on this website.
  • Comments and usernames containing language or concepts that could be deemed offensive will be deleted. Note this may include abusive, threatening, pornographic, offensive, misleading, or libelous language.
  • Comments complaining about the article subject or its source will be removed.
  • A failure to comply with these rules will result in a warning and, in extreme cases, a ban. Please also note that comments that attack or harass an individual directly will result in a ban without warning.
  • VideoCardz Moderating Team reserves the right to edit or delete any comments submitted to the site without notice.
  • If you have any questions about the commenting policy, please let us know through the Contact Page.
Hide Comment Policy
Comments